UTV Accessories

This kit is included in RZR-STAGE1, RZR-STAGE2, RZR-STAGE3, RZR-STAGE4, and RZR-STAGE5 complete systems already bundled with the PMX-2.

The RFRZ-PMX0DK dash kit is only available bundled with the Rockford Fosgate PMX-0.

Fiber Reinforced composite blend universal 10” subwoofer enclosure designed to be a direct fit for select RZR model vehicles. Designed to be used with Prime RM series 10" woofers, Punch PM series 10" woofer and T1 Slim series 10" woofers. Kit includes all needed hardware for the installation.

Power installation Kit utilizing 4 awg wire and allows for installation of 2 amplifiers which includes all Power/Ground wiring, front speaker wiring and amplifier mounting plate with hardware. Works with both 2 seat and 4 seat RZR models.

The RFBTAUX universal Bluetooth™ adapter allows to wirelessly stream media (music library, Pandora, Rhapsody, etc) from a Bluetooth™ enabled device through a factory Auxiliary input powered by the vehicle’s 12V accessory socket. Easy 1-button pairing function binds to Bluetooth™ enabled device and chimes on subsequent connections. Supplied 1/8” (3mm ...

The RFBTRCA universal Bluetooth™ adapter allows to wirelessly stream media (music library, Pandora, Rhapsody, etc) from a Bluetooth™ enabled device through stereo RCA output jacks. Auxiliary input powered by the vehicle’s 12V accessory socket. Easy 1-button pairing function binds to Bluetooth™ enabled device and chimes on subsequent connections. Supplied 1 ...

The PMX-USBEXT is a 33 foot (10 meter) extension cable for the USB connector on the rear of select PMX source units. This allows for a convenient access to the USB input to load and play music through your PMX radio over long distances, like in a boat.   ...

Polaris RZR PMX power and speaker harness.

The Ride Command® audio interface (RFPOL-RC34) is designed to connect Rockford Fosgate amplifiers with a factory Polaris® Ride Command® source unit. The two-part harness taps both front and subwoofer audio signals from Ride Command®, actively filters any electronic noise caused by the DYNAMIX suspension system and feeds them to a TM400X4ad ...

The PM-CL2B is a black marine grade cast aluminum wakeboard tower speaker clamp designed for use with the PM2652W-MB and RM1652W-MB

Perfect for keeping dirt and dust out of your Moto Wakeboard tower speakers when your UTV is stored or boat is docked for the winter.  Durable neoprene is soft and will not scratch speaker enclosure.  Easy to close Velcro strap and zipper makes installation and removal a snap.  Sold ...

This replacement T bracket attaches a standard enclosed speaker to a boat's wake tower clamp.  The replacement bracket is not supplied with hardware, so it's important to retain the existing screws and washers to be reused during installation. The replacement bracket is sold as an individual unit ...

This replacement T-bracket attaches a moto-can speaker to a UTV's roll-bar. The replacement bracket is not supplied with hardware, so it's important to retain the existing screws and washers to be reused during installation. The replacement bracket is sold as an individual unit (not in pairs,) so order ...

Amp kit and mounting plate for select YXZ® models.

The PMX-BTUR is a universal Bluetooth® remote control designed for use with any audio system that utilizes a mobile device (phone) as a source having Bluetooth® connectivity. Remote control allows user to adjust Volume, Track, Play, and Pause on Android® or Apple® mobile devices. The Bluetooth® 4.0 Smart Ready ...

Subwoofer enclosure for select Polaris® RANGER models.

The Ride Command® audio interface (RFPOL-RC5) is designed to connect Rockford Fosgate amplifiers with a factory Polaris® Ride Command® source unit. The two-part harness taps both front, rear and subwoofer audio signals from Ride Command®, actively filters any electronic noise caused by the DYNAMIX suspension system and feeds them to ...

This kit is included in RZR14-STAGE1, RZR14-STAGE2, RZR14-STAGE3, RZR14-STAGE4 and RZR14-STAGE5 complete systems.

This kit is included in RZR14-STAGE4, RZR14-STAGE5 complete systems and RZR14RC-STAGE4, RZR14RC-STAGE5 Ride Command® systems.

2nd generation subwoofer enclosure for select Can-Am® Maverick X3.  New suspended mounted design provides optimum clearance between floor-board and enclosure for optimum down-firing subwoofer response.  Fits under front driver or passenger seat. Allows full up and down travel of seat adjustment.

The PM-CL1B is a black marine grade cast aluminum wakeboard tower speaker clamp designed for use with the PM282W-B, PM282HW-B and the  PM2652W-B

This kit is included in the YXZ-STAGE1, YXZ-STAGE2, YXZ-STAGE3, YXZ-STAGE4, and YXZ-STAGE5 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

Subwoofer enclosure for select Yamaha® YXZ models.

Amp kit mounting plate for select RANGER® models.

The PM-CL3B is a black marine grade cast aluminum speaker clamp designed specifically for use with the PM2652W-MB and RM1652W-MB enclosed speakers on a Polaris Lock & Ride® roll cage used on RANGER and GENERAL.

Amp wiring harness for select Polaris GENERAL™ models.

Rear speaker harness for adding PM2652W-MB or RM1652W-MB. NOTE: Speakers also require PM-CL3B bracket kit.

Rear speaker harness for adding PM2652W-MB or RM1652W-MB. NOTE: Speakers also require PM-CL2B bracket kit.

Subwoofer enclosure for select Can-Am® Maverick X3.  Fits under driver's side seat.  Allows full up and down travel of seat adjustment.

4 AWG Amp kit for select Maverick X3 models.

This kit is included in RZR14-STAGE5 complete system and RZR14RC-STAGE5 Ride Command system.

Front lower speaker enclosure for select Yamaha® YXZ models.

Speaker enclosure for select Polaris® GENERAL models.

Front subwoofer enclosure for select Rockford Fosgate 10" subwoofers with mounting bracket.

8 AWG Amp kit for select Maverick X3 models.

This kit is included in the X3-STAGE1, X3-STAGE2, X3-STAGE3, X3-STAGE4, and X3-STAGE5 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

This kit is included in RZR14-STAGE3, RZR14-STAGE4 complete systems and RZR14RC-STAGE3, RZR14RC-STAGE4 Ride Command® systems.

The PM-CL1 is a white marine grade cast aluminum wakeboard tower speaker clamp designed for use with PM282W, PM282HW, and the PM2652W 

Fiber reinforced composite blend 6.5" front speaker enclosures designed to be a direct fit for select RZR models. Enclosures are compatible with Prime RM0652 and RM1652 model speakers as well as Punch PM2652 model speakers. Kit includes all mounting hardware needed for the installation.

Rear speaker harness for select YXZ® models.

This kit is included in the RNGR-STAGE1, RNGR-STAGE2, RNGR-STAGE3, and RNGR-STAGE4 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

This kit is included in the GNRL-STAGE1, GNRL-STAGE2, GNRL-STAGE3, and GNRL-STAGE4 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

This kit is included in RZR14-STAGE3, RZR14-STAGE4, RZR14-STAGE5 complete systems and RZR14RC-STAGE3, RZR14RC-STAGE4, RZR14RC-STAGE5 Ride Command® systems. Please note the wiring accessories are located inside the shipping box, located within the cardboard "triangle" support.

Upper speaker enclosure for select Yamaha® YXZ models.

Front speaker enclosures built for select Polaris® RANGER models.

Rear speaker harness, when adding PM2652W-MB or RM1652W-MB. Requires RFRNGR-K8 complete wire kit for installation. Mini wake speakers require PM-CL3B bracket.

The PMX-ANT is a powered antenna designed to boost AM/FM and WB (weather band) stations.  It's universal connectivity allows for use in Marine or UTV installation through a quick power connector.

This kit is included in RZR14-STAGE2, RZR14-STAGE3, RZR14-STAGE4, RZR14-STAGE5 complete systems and RZR14RC-STAGE3, RZR14RC-STAGE4, RZR14RC-STAGE5 Ride Command® systems.

Speaker enclosure for select Can-Am® Maverick X3 models. Compatible with factory equipped Smart-Lok module.

The PMX-USBP connects to any Rockford Fosgate PMX source unit equipped with a USB input jack and is Element Ready™ for protection against environmental contaminants. The stainless steel USB connections at both ends ensures it remains corrosion free, and the spring-loaded door is IP67 certified to keep access to the ...

This kit is included in RZR-STAGE1, RZR-STAGE2, RZR-STAGE3, RZR-STAGE4, and RZR-STAGE5 complete systems already bundled with the PMX-2.

The RFRZ-PMX0DK dash kit is only available bundled with the Rockford Fosgate PMX-0.

Fiber Reinforced composite blend universal 10” subwoofer enclosure designed to be a direct fit for select RZR model vehicles. Designed to be used with Prime RM series 10" woofers, Punch PM series 10" woofer and T1 Slim series 10" woofers. Kit includes all needed hardware for the installation.

The RFBTAUX universal Bluetooth™ adapter allows to wirelessly stream media (music library, Pandora, Rhapsody, etc) from a Bluetooth™ enabled device through a factory Auxiliary input powered by the vehicle’s 12V accessory socket. Easy 1-button pairing function binds to Bluetooth™ enabled device and chimes on subsequent connections. Supplied 1/8” (3mm ...

The RFBTRCA universal Bluetooth™ adapter allows to wirelessly stream media (music library, Pandora, Rhapsody, etc) from a Bluetooth™ enabled device through stereo RCA output jacks. Auxiliary input powered by the vehicle’s 12V accessory socket. Easy 1-button pairing function binds to Bluetooth™ enabled device and chimes on subsequent connections. Supplied 1 ...

Power installation Kit utilizing 4 awg wire and allows for installation of 2 amplifiers which includes all Power/Ground wiring, front speaker wiring and amplifier mounting plate with hardware. Works with both 2 seat and 4 seat RZR models.

Polaris RZR PMX power and speaker harness.

The PMX-USBEXT is a 33 foot (10 meter) extension cable for the USB connector on the rear of select PMX source units. This allows for a convenient access to the USB input to load and play music through your PMX radio over long distances, like in a boat.   ...

The Ride Command® audio interface (RFPOL-RC34) is designed to connect Rockford Fosgate amplifiers with a factory Polaris® Ride Command® source unit. The two-part harness taps both front and subwoofer audio signals from Ride Command®, actively filters any electronic noise caused by the DYNAMIX suspension system and feeds them to a TM400X4ad ...

Front lower speaker enclosure for select Yamaha® YXZ models.

Speaker enclosure for select Polaris® GENERAL models.

Front subwoofer enclosure for select Rockford Fosgate 10" subwoofers with mounting bracket.

8 AWG Amp kit for select Maverick X3 models.

This kit is included in the X3-STAGE1, X3-STAGE2, X3-STAGE3, X3-STAGE4, and X3-STAGE5 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

This kit is included in RZR14-STAGE3, RZR14-STAGE4 complete systems and RZR14RC-STAGE3, RZR14RC-STAGE4 Ride Command® systems.

The PM-CL1B is a black marine grade cast aluminum wakeboard tower speaker clamp designed for use with the PM282W-B, PM282HW-B and the  PM2652W-B

This kit is included in the YXZ-STAGE1, YXZ-STAGE2, YXZ-STAGE3, YXZ-STAGE4, and YXZ-STAGE5 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

Subwoofer enclosure for select Yamaha® YXZ models.

Amp kit mounting plate for select RANGER® models.

The PM-CL3B is a black marine grade cast aluminum speaker clamp designed specifically for use with the PM2652W-MB and RM1652W-MB enclosed speakers on a Polaris Lock & Ride® roll cage used on RANGER and GENERAL.

Amp wiring harness for select Polaris GENERAL™ models.

Rear speaker harness for adding PM2652W-MB or RM1652W-MB. NOTE: Speakers also require PM-CL3B bracket kit.

Rear speaker harness for adding PM2652W-MB or RM1652W-MB. NOTE: Speakers also require PM-CL2B bracket kit.

Subwoofer enclosure for select Can-Am® Maverick X3.  Fits under driver's side seat.  Allows full up and down travel of seat adjustment.

4 AWG Amp kit for select Maverick X3 models.

This kit is included in RZR14-STAGE5 complete system and RZR14RC-STAGE5 Ride Command system.

The PM-CL2B is a black marine grade cast aluminum wakeboard tower speaker clamp designed for use with the PM2652W-MB and RM1652W-MB

Perfect for keeping dirt and dust out of your Moto Wakeboard tower speakers when your UTV is stored or boat is docked for the winter.  Durable neoprene is soft and will not scratch speaker enclosure.  Easy to close Velcro strap and zipper makes installation and removal a snap.  Sold ...

This replacement T bracket attaches a standard enclosed speaker to a boat's wake tower clamp.  The replacement bracket is not supplied with hardware, so it's important to retain the existing screws and washers to be reused during installation. The replacement bracket is sold as an individual unit ...

This replacement T-bracket attaches a moto-can speaker to a UTV's roll-bar. The replacement bracket is not supplied with hardware, so it's important to retain the existing screws and washers to be reused during installation. The replacement bracket is sold as an individual unit (not in pairs,) so order ...

Amp kit and mounting plate for select YXZ® models.

The PMX-BTUR is a universal Bluetooth® remote control designed for use with any audio system that utilizes a mobile device (phone) as a source having Bluetooth® connectivity. Remote control allows user to adjust Volume, Track, Play, and Pause on Android® or Apple® mobile devices. The Bluetooth® 4.0 Smart Ready ...

Subwoofer enclosure for select Polaris® RANGER models.

The Ride Command® audio interface (RFPOL-RC5) is designed to connect Rockford Fosgate amplifiers with a factory Polaris® Ride Command® source unit. The two-part harness taps both front, rear and subwoofer audio signals from Ride Command®, actively filters any electronic noise caused by the DYNAMIX suspension system and feeds them to ...

This kit is included in RZR14-STAGE1, RZR14-STAGE2, RZR14-STAGE3, RZR14-STAGE4 and RZR14-STAGE5 complete systems.

This kit is included in RZR14-STAGE4, RZR14-STAGE5 complete systems and RZR14RC-STAGE4, RZR14RC-STAGE5 Ride Command® systems.

2nd generation subwoofer enclosure for select Can-Am® Maverick X3.  New suspended mounted design provides optimum clearance between floor-board and enclosure for optimum down-firing subwoofer response.  Fits under front driver or passenger seat. Allows full up and down travel of seat adjustment.

Upper speaker enclosure for select Yamaha® YXZ models.

Front speaker enclosures built for select Polaris® RANGER models.

Rear speaker harness, when adding PM2652W-MB or RM1652W-MB. Requires RFRNGR-K8 complete wire kit for installation. Mini wake speakers require PM-CL3B bracket.

The PMX-ANT is a powered antenna designed to boost AM/FM and WB (weather band) stations.  It's universal connectivity allows for use in Marine or UTV installation through a quick power connector.

This kit is included in RZR14-STAGE2, RZR14-STAGE3, RZR14-STAGE4, RZR14-STAGE5 complete systems and RZR14RC-STAGE3, RZR14RC-STAGE4, RZR14RC-STAGE5 Ride Command® systems.

Speaker enclosure for select Can-Am® Maverick X3 models. Compatible with factory equipped Smart-Lok module.

The PMX-USBP connects to any Rockford Fosgate PMX source unit equipped with a USB input jack and is Element Ready™ for protection against environmental contaminants. The stainless steel USB connections at both ends ensures it remains corrosion free, and the spring-loaded door is IP67 certified to keep access to the ...

The PM-CL1 is a white marine grade cast aluminum wakeboard tower speaker clamp designed for use with PM282W, PM282HW, and the PM2652W 

Fiber reinforced composite blend 6.5" front speaker enclosures designed to be a direct fit for select RZR models. Enclosures are compatible with Prime RM0652 and RM1652 model speakers as well as Punch PM2652 model speakers. Kit includes all mounting hardware needed for the installation.

Rear speaker harness for select YXZ® models.

This kit is included in the RNGR-STAGE1, RNGR-STAGE2, RNGR-STAGE3, and RNGR-STAGE4 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

This kit is included in the GNRL-STAGE1, GNRL-STAGE2, GNRL-STAGE3, and GNRL-STAGE4 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

This kit is included in RZR14-STAGE3, RZR14-STAGE4, RZR14-STAGE5 complete systems and RZR14RC-STAGE3, RZR14RC-STAGE4, RZR14RC-STAGE5 Ride Command® systems. Please note the wiring accessories are located inside the shipping box, located within the cardboard "triangle" support.