Prime 1,200 Watt Class-D Mono Amplifier R1200-1D

R1200-1D_1
R1200-1D_2
R1200-1D_6
R1200-1D_4
R1200-1D_5
R1200-1D_3

Prime 1,200 Watt Class-D Mono Amplifier R1200-1D

The PRIME R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.

• This model replaced by the R2-1200X1

Read More
1 Review
Discontinued
Overview

The Prime R1200-1D subwoofer amplifier offers high efficiency through the implementation of its Class-D circuitry while delivering rich, full bass to any system. This car amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.

FEATURES AT A GLANCE

  • On-board Punch EQ with +18dB boost @ 45Hz
  • Infrasonic filter
  • RCA pass-thru outputs
  • 12dB/octave Butterworth crossover
  • Real time output and power supply thermal sensing
  • Remote PLC (Punch Level Control)
  • Cast aluminum heatsink
  • Top mounted controls
  • MOSFET power supply
  • 4 Gauge power/ground connectors
  • Muted turn on
  • Short circuit protection
  • 1 Year Warranty
Technologies
CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's ...

Learn more
Class-D

High efficiency amplifier design that reduces current consumption from the charging system.

Learn more
CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 ...

Learn more
Specifications
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
1200 Watts RMS
Rated Power
(RMS Continuous Power)
400 Watts x 1 @ 4-Ohm
800 Watts x 1 @ 2-Ohm
1200 Watts x 1 @ 1-Ohm
Dynamic Power
(PVC/PowerCube®)
499 Watts x 1 @ 4-Ohms 0° Res
898 Watts x 1 @ 2-Ohms 0° Res
1,400 Watts x 1 @ 1-Ohm 0° Res
Bridgeable
No
Frequency Response
20Hz to 250Hz +/-1dB
Input Sensitivity
150 mV to 4 V
Circuit Topology Class
Class D
Efficiency (average)
85% @ 4-Ohm
85% @ 2-Ohm
80% @ 1-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Signal Input
Low Level: 1 RCA Pair
Signal Output
Low Level: 1 RCA Pair
Tone Controls
0dB to +18dB @ 45Hz
Crossover Controls
Low-Pass: Variable 50Hz - 500Hz @ 12dB/Octave
Infrasonic: Variable 15Hz - 40Hz
Remote Controls
Punch Level Control
(when connected, is linked to "gain control" to provide remote output level)
Visual Indicators
Power
Protect
Power Wire Gauge
4 AWG
Power Input Connector
Block
Speaker Wire Gauge
12 AWG
Speaker Output Connector
Block
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
150 A
Average Current Draw (13.8V Music)
55 A
Max. Current Draw (13.8V Sinewave)
110 A
Suggested Alternator
100 A
Included In The Box
Dimensions (H x W x D)
1.97" x 6.77" x 11.06"
(5cm x 17.20cm x 28.10cm)
Shipping Weight
7.825 Lbs. (7.82 Kg.)
Compatibility
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Reviews

Great amp for the $

I am an audio but and have been for years. This amp delivers nicely what they claim it to do. It’s more powerful than disclosed and when paired with 2 p3d4 12” subs. It will knock your head off. However I will warn you, it is thirsty for power. So MAKE SURE to do a big 3 upgrade to your electrical system along with standard wiring. Make sure your wires are all OFC and connections are tight. I initially used cca wire and it ended up getting hot enough to melt the housing holding the fuse under the hood.

Again this is a powerful amp, you won’t be sorry using it. I have upgraded to a power series amp and removed this, but this amp worked very well

5.0

1 Review
Write a Review

Be first to hear about the latest products.

Sign up for product updates.