120 Watt 2-Ch. Limited Edition Amp Punch75

120 Watt 2-Ch. Limited Edition Amp Punch75

Read More
0 Reviews
Discontinued
Overview

Renowned as the amplifier that just kept playing and playing know matter what you threw at it, the '25 to LIFE.' Punch75 takes that heritage and adds today’s technology to make one seriously bulletproof amplifier.

FEATURES AT A GLANCE

  • Stealth Connections
  • 4 Gauge power/ground connections with built-in ATC fusing
  • Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
  • Thermal Sensing
  • Connector Cover
  • RCA pass-thru outputs
  • 1 Year Warranty
Technologies
Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

Learn more
Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered ...

Learn more
TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the ...

Learn more
NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...

Learn more
MEHSA

Rockford Fosgate amps use MEHSA, a thermal substrate that maximizes heat transfer between MOSFET power devices ...

Learn more
TO-247 MOSFETs

(left-OLD | right-NEW)
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more ...

Learn more
Specifications
Cta-2006 Compliant
Number of Channels
2
Total Power
(Sum of Rated Power)
120 Watts RMS
Rated Power
(RMS Continuous Power)
37.5 Watts x 2 @ 4-Ohm
60 Watts x 2 @ 2-Ohm
120 Watts x 1 @ 4-Ohm Bridged
Dynamic Power
(Pvc/Powercube®)
Bridgeable
Yes
Frequency Response
20Hz to 20kHz +/- 0.5 dB
Input Sensitivity
Circuit Topology Class
Class A/B
Efficiency (Average)
Total Harmonic Distortion (Thd+Noise)
Signal Input
Low level: 1 RCA pair
Signal Output
Low level: 1 RCA pair
Tone Controls
Bass: 0dB to +18dB @ 45Hz
Crossover Controls
High-Pass (HP): 40-400Hz 12dB/octave Butterworth
Low-Pass (LP): 40-400Hz 12dB/octave Butterworth
Remote Controls
Punch Bass EQ (included with cable)
Visual Indicators
Power On
Power Wire Gauge
4 AWG
Power Input Connector
Block
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Screw terminal barrier strip
Cooling
Convection
Heatsink
Operating Voltage
Recommended Fuse
(Not Included)
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
Suggested Alternator
Included In The Box
Dimensions (H x W x D)
2.6 x 11.2 x 13.6 (in)
6.6 x 28.5 x 34.6 (cm)
Shipping Weight
15 Lbs.
(6.8 Kg.)
Compatibility
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

The below diagrams optimize this amp for its lowest recommended BRIDGED/MONO load.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Reviews

Be the first to review this product.

No reviews yet

0 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.

Get FREE SHIPPING using this code during checkout!
FREESHIP