M600-5

Prime Marine 600 Watt 5-Channel Amplifier M600-5

The M600-5 is a 600 watt marine grade “all-in-one” amplifier featuring four full-range stereo channels and a dedicated mono subwoofer channel.

Read More
0 Reviews
Discontinued
Overview

The Prime M600-5 is a 600 Watt amplifier specifically designed for Marine and Motorsport applications through its 2-part epoxy coated Printed Circuit Board (PCB). The four stereo channels feature Class-A/B topology and the dedicated subwoofer channel runs on high efficiency Class-D. High level and low-level RCA inputs allow for flexibility and the on-board Punch EQ, built-in 12dB crossovers, and independent gain controls permit precise tuning. Real time output and thermal sensing along with current and short circuit protection protect the amplifier under adverse conditions.

  • Class A/B technology (4 channel)
  • Class-D technology (sub channel)
  • Remote Punch Level Control (sub channel) included
  • RCA and high level input with 2/4/5 channel select
  • 12 dB/Oct Butterworth crossovers
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Separate Front, Rear and Sub gain control
  • Real time output and power supply thermal sensing
  • Cast aluminum heat sink
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Over current and short circuit protection
  • Marine grade two part epoxy coating on circuit boards
  • Muted turn on
  • 2-Year Warranty
Technologies
CEA-2006

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's ...

Learn more
x
CEA-2006

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Element Ready™ - Amps

These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.

Learn more
x
Element Ready™ - Amps

These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 ...

Learn more
x
CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

Class-AB

An amplifier topology with the best of both worlds; a Class A preamp and Class B ...

Learn more
x
Class-AB

An amplifier topology with the best of both worlds; a Class A preamp and Class B output stage.

Class-D

High efficiency amplifier design that reduces current consumption from the charging system.

Learn more
x
Class-D

High efficiency amplifier design that reduces current consumption from the charging system.

Specifications
CEA-2006 Compliant
CEA-2006 Guidelines CEA-2006 Power Rating
50Wx4 + 200Wx1 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
Number of Channels
5
Total Power
(Sum of Rated Power)
600 Watts RMS
Rated Power
(RMS Continuous Power)
50W x 4 + 200W x 1 @ 4-Ohm
75W x 4 + 300W x 1 @ 2-Ohm
150W x 2 @ 4-Ohm Bridged
Dynamic Power
(PVC/PowerCube®)
57W x 4 + 221W x 1 @ 4-Ohm
90W x 4 + 390W x 1 @ 2-Ohm
178W x 2 @ 4-Ohm Bridged
Bridgeable
Yes (front/rear channels)
Frequency Response
20Hz to 20kHz +/-1dB
Input Sensitivity
Circuit Topology Class
Class A/B + Class D (Sub)
Efficiency (average)
Channels 1/2/3/4: 64% @ 4-Ohm
Sub Channel: 85% @ 4-Ohm
Total Harmonic Distortion (Thd+Noise)
Signal Input
High Level: 2x 4-pin MOLEX
Low Level: 3 RCA Pair
Signal Output
-
Tone Controls
Front: 0/6/12dB @ 45Hz
Rear: 0/6/12dB @ 45Hz
Sub: Variable 0dB to 12dB @ 45Hz
Crossover Controls
Front Channels: HP/LP Variable 50Hz - 250Hz @ 12dB/octave
Rear Channels: HP/LP Variable 50Hz - 250Hz @ 12dB/octave
Sub Channel: LP Variable 50Hz - 250Hz @ 12dB/octave
Remote Controls
Punch Level Control: When connected is linked to "gain control" to provide remote output level
Visual Indicators
Power
Protect
Power Wire Gauge
4 AWG
Power Input Connector
Block
Speaker Wire Gauge
12 AWG
Speaker Output Connector
Block
Cooling
Convection
Heatsink
Operating Voltage
Recommended Fuse
(Not Included)
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
Suggested Alternator
Dimensional Diagram
Dimensions (H x W x D)
1.98" x 6.77" x 13.99"
(5cm x 17.2cm x 33.5cm)
Shipping Weight
9.1 Lbs. (4.12 Kg.)
Compatibility
Support

Knowledge Base Articles


Show all Knowledge Base topics

Ask Our Experts

Live Chat:
Via Email:

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


View Process

Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10



Wiring Diagram #11

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Reviews

Be the first to review this product.

No reviews yet

0 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.