RZR Audio Roof – 2023

Elevated Audio

The RZR Audio Roof system is designed to take your off-road experience to new heights. It’s our loudest system, features simple plug and play installation, and engineered to complement the factory look of your vehicle.

Compatible with the following models:
• 2020+ RZR Pro XP
• 2020+ RZR Turbo R

SYSTEM OVERVIEW

The RZR Overhead Audio systems by Rockford Fosgate are specifically designed for 2020 and newer Polaris Pro-XP and Turbo R models.

The 2-passenger model is equipped with four 8" coaxial speakers, a 10" subwoofer, two 400-watt amplifiers, and PMX-P2. The four passenger model includes four additional 8" coaxial speakers in the rear. Both systems feature bright RGB LED lighting, controllable with our Color Optix App™.

We also have plug-and-play systems that use your existing PMX-P2 or your Ride Command infotainment center.

SYSTEM SET-UP

Unlock the full potential of your audio roof by downloading the RF CONNECT App to finish the setup process. This App will load our DSP preset, fine-tuned by Rockford Fosgate acoustic engineers to deliver the best sound quality possible. Once installed, you can also customize the settings for your music taste.

Source Unit

PMX-P2

The PMX-P2 features a 2.7” ultra-bright, color display with day/night mode so it’s easy-to-read in any condition. The unit supports USB, Bluetooth®, Pandora streaming, and includes Weather Band so you don’t get caught in bad weather. Audio adjustments are fine-tuned using a 7-band EQ, Punch EQ, and sub level control. Two plug-and-play models are available for UTV’s equipped with existing PMX-P2 or Ride Command infotainment systems.

Amplifiers

800 Watts of Power

Two 400-watt audio amplifiers are designed to provide peak audio performance, making the system is twice as loud as the stock system. One amplifier drives full-range speakers and the second amp powers the subwoofer. The amplifiers are engineered for all-day performance by incorporating rollback technology with thermal protection. The high-efficient class-D topology eliminates excessive drain on your battery while effectively dissipating heat through an extruded aluminum chassis.

Speakers

8-Inch Coaxial

Full-range 8-inch coaxial speakers provide exceptional frequency response and strong mid-bass output, with 2-passenger models equipped with four speakers, and 4-passenger models equipped with eight. The polypropylene speaker cone and co-molded Santoprene surround incorporate UV inhibitors, protecting them from the outdoor environment. Oversized 1.5” voice coils and neodymium magnets minimize weight and provide exceptional motor strength for vocal clarity.

Subwoofer

10-Inch 400W

A 10-inch subwoofer in a sealed enclosure delivers low-end bass output you expect from Rockford Fosgate. Dual chamber acoustics separate the airspace between the subwoofer and speakers, providing epic bass without rattles. A large 2.5-inch dual-layer voice coil and high strength motor structure contribute to hard-hitting bass, while the polypropylene cone and co-molded surround are embedded with UV inhibitors, making them impervious to weather conditions.

Interior Accent Lighting

Color Optix™

Both 2-seat and 4-seat overhead audio systems feature bright RGB LED lighting, wrapped around the entire audio system. Accent colors are simple to change using the Rockford Fosgate Color Optix App, so it’s simple to change to match the vibe of your ride.

F.T.R.C.™ (Factory Tune with Ride Command)

A industry first, for a second to none audio experience. No tuning, no tweaking is needed. This high output audio system is intergraded seamlessly with Ride Command and factory tuned for a class-leading experience.

D.C.A.™ (Dual Chamber Acoustics)

DCA is Dual Chamber Acoustics. Since the speakers and subwoofers share this common one-piece design - the Dual Chamber Acoustics technology was purpose built to separate the airspace between the subwoofer and speakers. This means better output, no rattle with clean crisp audio.

O.R.R.™ (Off-Road Ready)

Overbuilt for the outdoors, every part of this audio system was designed to withstand the elements. The speakers, amplifiers, subwoofer, and enclosures are more than capable to battle UV, mud, water, and sand.

Vast + Co-Molded Surround

VAST injection molded Santoprene surrounds provide low distortion and high efficiency mid-bass performance, built to perform well in all weather conditions. It won’t dry out or rot with moisture, like other foam surrounds.

ICC+

The Integrated Concealed Crossover boasts a hyper-efficient design and produces the clarity and output usually only found in traditional component speaker set-up.

Full Range Class-D Technology

More power and less electrical fatigue. These high-efficiency amplifiers produce class leading power and don’t over-draw on the side-by-side electrical system.

Vibration Tested

Tested and then re-tested to ensure supreme durability. These subwoofers have endured extreme conditions and then vibration validation all to make sure they stand the test of time.

Specifications

2-SEAT WITH SOURCE:

  •  

—DESCRIPTION:

  • For systems that need a source unit

—MODEL #:

  • 2889711

—PANELS:

  • 1 pc.

—SOURCE:

  • 2.7" PMX-2

—AMPLIFIERS:

  • 400W 4Ch + 400W Mono

—SPEAKER RESPONSE:

  • 45 Hz to 20 kHz

—SPEAKERS:

  • (4) 8" 2Ω Coaxial

—SUBWOOFER:

  • 400W 10" 4Ω Subwoofer

—MODEL #:

  • 2889709

—INTERNAL LIGHT:

  • Integrated RGB accent + LED dome lighting

—EXTERNAL LIGHT:

  • 33" single row Pro Armor light bar

4-SEAT WITH SOURCE:

  •  

—DESCRIPTION:

  • For systems that need a source unit

—PANELS:

  • 2 pcs.

—SOURCE:

  • 2.7" PMX-P2

—SPEAKERS:

  • (8) 8" 4Ω Coaxial Speakers

—AMPLIFIERS:

  • 400W 4Ch + 400W Mono

—SPEAKER RESPONSE:

  • 45 Hz to 20 kHz

—SUBWOOFERS:

  • 400W 10" 4Ω Subwoofer

—INTERNAL LIGHT:

  • Integrated RGB accent and LED dome lighting

—EXTERNAL LIGHT:

  • 33" single row Pro Armor Light bar

2-SEAT ROOF ONLY:

  •  

—DESCRIPTION:

  • For systems equipped with PMX-P2 or Ride Command

—MODEL:

  • 2889710

—SOURCE:

  • Adaptor for factory PMX-P2 / Ride Command

—PANELS:

  • 1 pc.

—AMPLIFIERS:

  • 400W 4Ch + 400W Mono

—SPEAKERS:

  • (4) 8" 2Ω Coaxial

—SPEAKER RESPONSE:

  • 45 Hz to 20 kHz

—SUBWOOFER:

  • 400W 10" 4Ω Subwoofer

—INTERNAL LIGHT:

  • Integrated RGB accent and LED dome lighting

—EXTERNAL LIGHT:

  • 33" single row Pro Armor Light bar

4-SEAT ROOF ONLY:

  •  

—DESCRIPTION:

  • For systems equipped with PMX-P2 or Ride Command

—MODEL:

  • 2889708

—PANELS:

  • 2 pcs.

—AMPLIFIERS:

  • 400W 4Ch + 400W Mono

—SOURCE:

  • Adaptor for factory PMX-P2 / Ride Command

—SPEAKER RESPONSE:

  • 45 Hz to 20 kHz

—SPEAKERS:

  • (8) 8" 4Ω Coaxial Speakers

—SUBWOOFER:

  • 400W 10" 4Ω Subwoofer

—INTERNAL LIGHT:

  • Integrated RGB accent and LED dome lighting

Mobile App:

  •  

—EXTERNAL LIGHT:

  • 33" single row Pro Armor Light bar

—iOS App:

—DESCRIPTION:

  • RGB Accent Light Control

—Android App:

—Polaris Part:

  • #2884347 & #2884391

Required Dual Battery Kit (sold separately):

  •  

—Description:

  • Dual Battery Kit

Required Amp Upgrade Kit (sold separately):

  •  

—Polaris Part:

  • #2884908

—Description:

  • Amp Upgrade for Systems with Existing PMX-P2