amplifier accessories
Power Cable
100 Foot Spool 4 AWG Frosted Black Wire
RFW4B
Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.
Notify Me When Back In Stock:
Speaker Wire
12 AWG Speaker Wire 250 Foot Spool Frosted Black/Silver
RFW12-250
Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.
Notify Me When Back In Stock:
Power Only Kits
1/0 Power Installation Kit
RFK1
Kit includes 17 feet of 1/0 AWG power wire, 3 feet of ground wire, ANL/Maxi fuse holder and fuse, 20 feet of remote wire, 100 Amp fuse.
Notify Me When Back In Stock:
Complete Kits
4 AWG Complete Dual Amp Installation Kit
RFK4D
Kit includes 17 feet of power wire 4 AWG/6 feet of power wire 8 AWG, 3 feet of ground wire 4 AWG/6 feet of ground wire 8 AWG, 30 feet of 16 AWG speaker wire, (2) 16 feet twisted pair RCA's, Maxi fuse holder and fuse, (2 ...
Notify Me When Back In Stock:
Universal PEQ Remote & Line Driver
Universal PEQ Remote & Line Driver
RFPEQU
The RFPEQU universal Punch EQ is a remote control bass knob compatible with any branded aftermarket audio system. Adapter features a high-level signal input with auto turn-on capability and adjustable sensitivity to match any audio source. The 2-channel RCA outputs with built-in line driver allow the signal to connect to ...
Notify Me When Back In Stock:
Circuit Breakers
100 Amp Circuit Breaker
RFCB100
100 amp circuit breaker 1/0 AWG/4 AWG inputs.
Notify Me When Back In Stock:
Power & Signal Kits
10 AWG Power & Signal Installation Kit
RFK10I
Kit includes 17 feet of 10 AWG power wire, 3 feet of 10 AWG ground wire, (1) 16 feet twisted pair RCA, ATC fuse holder and fuse, 20 feet of remote wire, 25 Amp fuse.
Notify Me When Back In Stock:
Battery Clamps
4 AWG or 1/0 AWG Positive-Negative Battery Terminal
RFDB1
Platinum plated battery terminals allowing for both a positive or negative connection utilizing the supplied sizing ring. Terminals allow for multiple wire size inputs. Positive/Negative battery terminal, platinum finish. (2) 1/0 AWG/4 AWG input (2) 8 AWG inputs.
Notify Me When Back In Stock:
Amplifier Remote Controls
ParaPunch Bass (2004-2006 Power)
PPB1
Para-Punch Bass remote EQ features a variable 35-70Hz frequency range and 0dB to +18dB bass boost. Cable and mounting hardware included. For use with 2004-2006 POWER ELITE amplifiers.
Notify Me When Back In Stock:
Dual Twisted Pair Interconnects
10 Feet Premium Dual Twist Signal Cable
RFIT-10
Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer sheild for durability.
Notify Me When Back In Stock:
Distribution Blocks
1/0 AWG Distribution Block
RFD1
Distribution block, platinum finish. (1) 1/0 AWG/4 AWG inputs. (2) 1/0 AWG/4 AWG outputs.
Notify Me When Back In Stock:
Bridging Cable for Power bd Amplifiers
Bridging Cable for Power bd Amplifiers
bdSYNC2
The bdSYNC2 cable is designed to strap a pair of Class-bd POWER series amplifiers together to make one large mono amplifier. Male-to-male connector with 1.8 Meter long cable. Designed for Rockford Fosgate POWER class-bd amplifiers only.
Notify Me When Back In Stock:
Ring Terminals
1/0 AWG Set Screw Ring Terminal
RFT1
1/0 AWG set screw ring terminal with 8.15 mm diameter hole. Platinum finish, 2 pack.
Notify Me When Back In Stock:
100 Amp ANL Fuse
RFFA100
2 Pack, platinum finish.
Notify Me When Back In Stock:
Twisted Pair Interconnects
10 Feet Twisted Pair Signal Cable
RFI-10
Twisted pair design for noise rejection, split center pin for a secure connection, frosted outer sheild for durability and flexibility.
Notify Me When Back In Stock:
In-Line Fuse Holders
Inline AGU Fuse Holder
RFFAGU
Platinum plated fuse holder, flexibility of multiple wire size inputs. Inline AGU fuse holder, platinum finish. Accepts 4 AWG or 8 AWG wire.
Notify Me When Back In Stock:
Speaker Line Adapter
Speaker Line To Male RCA Adapter
RFI2SW
This high level speaker wire to RCA adaptor is an economic way to connect a factory OEM source unit to an amplifier. Please refer to installation instructions to prevent possible damage to source unit.
Notify Me When Back In Stock:
AGU Fuses
40 Amp AGU Fuse
RFFU40
4 Pack, Platinum Finish
Notify Me When Back In Stock:
GM Battery Posts
GM Battery Post Extender
RFDGM
Platinum plated, available for single power connection. Allows additional power or ground connections.
Notify Me When Back In Stock:
Y-Adaptors
Twisted Pair Y-Adapter 1 Female To 2 Male
RFIY-1F
Twisted pair design for noise rejection, split center pin for a secure connection, frosted outer sheild for durability and flexibility.
Notify Me When Back In Stock:
MAXI Fuses
100 Amp Maxi Fuse
RFFM100
2 Pack, platinum finish.
Notify Me When Back In Stock:
RCA Male Adaptor
RCA Male Adaptor
RFIS
The RFIS is a female RCA coupler, allowing two RCA cables with male ends to connect to each other.
Notify Me When Back In Stock:
Speaker Output Harness
Rear Speaker Output (Compact Amps)
1560-56544-01
Rear channel 4-pin to bare wire speaker output replacement harness. For use with select compact PUNCH and POWER series amplifiers
Notify Me When Back In Stock:
Signal Input Harnesses
Rear Signal Input (Compact Amps)
1560-56727-02
Rear channel low-level RCA to 4-pin input replacement harness. Can also be used as a high-level input harness by cutting off the RCA input jacks. For use with select compact PUNCH and POWER series amplifiers
Notify Me When Back In Stock:
Amplifier Power & Speaker Connectors
Power Plug Type-1 (Compact Amps)
1040-56378
Detachable power plug with connections for Battery (B+), Ground (G), and Remote Turn-On (REM). Secures bare wire using screw and captive compression clamp. For use with select 2011 and newer compact PUNCH amplifiers.
Notify Me When Back In Stock:
Accessory Wiring Kit for Amplified Loaded Enclosures
Accessory Wiring Kit for Amplified Loaded Enclosures
1130-59232-01
Complete kit includes the following components:
Notify Me When Back In Stock:
High-to-Low Converter
2-Channel High-to-Low Converter
RF-HLC
The RF-HLC is a 2-channel high-level to low-level signal converter designed for factory or aftermarket radios that do not have dedicated low-level RCA outputs. The adapter converts high-level signal from the radio's speaker line and transforms it into a safer low-level audio signal. This allows you to add a ...